Skip to main content

What is ASME (The American Society of Mechanical Engineers)?


The most populer and comprehensive set of codes and standards used around the globe in mechanical design and construction are the ASME codes & standards.ASME is a not-for-profit professional organization.

 ASME (The American Society of Mechanical Engineers)

 ASME was founded in 1880 by Alexander Lyman Holley, Henry Rossiter Worthington, John Edison Sweet and Matthias N. Forney in response to numerous steam boiler pressure vessel failures.Known for setting codes and standards for mechanical devices, ASME conducts one of the world's largest technical publishing operations,holds numerous technical conferences and hundreds of professional development courses each year, and sponsors numerous outreach and educational programs.

 The organization’s stated vision is to be the premier organization for promoting the art, science and practice of mechanical and multidisciplinary engineering and allied sciences to the diverse communities throughout the world.

 Its stated mission is to promote and enhance the technical competency and professional well-being of its members, and through quality programs and activities in mechanical engineering, better enable its practitioners to contribute to the well-being of humankind. As of 2006, the ASME has 120,000 members.

ASME boiler and pressure vessel code (BPVC) :-
The largest ASME standard, both in size and in the number of volunteers involved in its preparation, is the ASME Boiler and Pressure Vessel Code (BPVC). The BPVC provides rules for the design, fabrication, installation, inspection, care, and use of boilers, pressure vessels, and nuclear components. The code also includes standards on materials, welding and brazing procedures and qualifications, nondestructive examination, and nuclear in-service inspection.


Core values include:
  • Embrace integrity and ethical conduct.
  • Embrace diversity and respect the dignity and culture of all people.
  • Nurture and treasure the environment and our natural and man-made resources.
  • Facilitate the development, dissemination and application of engineering knowledge.
  • Promote the benefits of continuing education and of engineering education.
  • Respect and document engineering history while continually embracing change.
  • Promote the technical and societal contribution of engineers.

 Student competitions
  • ASME holds a variety of competitions every year for engineering students from around the world.
  • Human Powered Vehicle Challenge (HPVC)
  • Student Design Competition (SDC)
  • Innovative Design Simulation Challenge (IDSC)
  • Innovative Additive Manufacturing 3D Challenge (IAM3D)
  • Old Guard Competitions
  • Innovation Showcase (IShow)
  • Student Design Expositions
Labels:

Comments

Post a Comment

Popular posts from this blog

8 Types of Commonly Used Flanges for Piping System-- Explained

A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed.  A flanged joint is composed of three separate and independent although interrelated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all these elements to attain a joint, which has acceptable leak tightness. There are different types of pipe flanges   used in the piping systems depending upon the fluid, PT rating, material of construction, connecting equipment etc. Below are the types of flanges used in piping based on facing. Most Commonly Used Pipe Flanges are :- WELDING NECK FLANGE LONG WELDING NECK SLIP ON FLANGE THREADED FLANGE SOCKET WELD FLANGE LAP JOINT FLANGE BLIND FLANGE STUB END 1.WELDING NECK...
Post a Comment
Read more

What is meant by Net Positive Suction Head (NPSH) in Piping World ?

Net positive suction head is the term that is usually used to describe the absolute pressure of a fluid at the inlet to a pump minus the vapour pressure of the liquid. The resultant value is known as the Net Positive Suction Head available. The term is normally shortened to the acronym NPSHa, the "a" denotes available. Net Positive Suction Head Available( NPSHa) : The amount of NPSH available to the pump from the suction line is termed NPSHa. And also NPSHa is defined as: NPSHa = Pressure head + Static head – Vapor pressure head of your product – Friction head loss in the piping, valves and fittings. A similar term is used by pump manufactures to describe the energy losses that occur within many pumps as the fluid volume is allowed to expand within the pump body. This energy loss is expressed as a head of fluid and is described as NPSHr (Net Positive Suction Head requirement) the "r" suffix is used to denote the value is a requirement.  Net P...
Post a Comment
Read more

Standard & Codes that need to be followed while Designing or Manufacturing any Piping System

There are certain standard codes that need to be followed while designing or manufacturing any piping system. Organizations that promulgate piping standards include: ASME - The American Society of Mechanical Engineers - B31 series ASME B31.1 Power piping (steam piping etc.) ASME B31.3 Process piping ASME B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids and oil and gas ASME B31.5 Refrigeration piping and heat transfer components ASME B31.8 Gas transmission and distribution piping systems ASME B31.9 Building services piping ASME B31.11 Slurry Transportation Piping Systems (Withdrawn, Superseded by B31.4) ASME B31.12 Hydrogen Piping and Pipelines ASTM - American Society for Testing and Materials ASTM A252 Standard Specification for Welded and Seamless Steel Pipe Piles. API - American Petroleum Institute API 5L Petroleum and natural gas industries—Steel pipe for pipeline transportation systems. CWB - Canadian Welding Bur...
Post a Comment
Read more